Level Measurement & Control

Davis-Klinger MLG: Magnetic Level Gauges with Local Indication and Point Level Switching or Continuous Output. Large brightly coloured indicating wafers are easy to read, even at a distance. The ideal solution where the risk of fluid leaking to the environment must be voided. Eliminates maintenance associated with conventional glass gauges. Available with optional Magnetostrictive Linear Displacement Transducer for 4-20mA output.

Gems Sensors : SureSite Magnetic Level Gauges Top, Bottom or Side Mount; Single or Multipoint Float/Reed Switches in Buna N, St.-St., Brass, PVC, Teflon, P.P. and other materials; Electro-Optic Solid State sensors and Conductance types for Compact High Pressure Solutions, High Purity models and Ultrasonic Switches and Transmitters. DIPTAPE® and DRUMTAPE® mechanical indicators for tanks and drums.

Warrick: Conductance Actuated Single or Multi-Point Level Controls for Alarm, Pump-Up or Pump-Down Control of Conductive Liquids. Intrinsically Safe Control Panels.

Flowline

- Digital Infinity: Provides unparalleled ultrasonic sensor performance and application benefits through advanced digital surface imaging technology. The sensors are capable of ranges up to 10m with a small 2” transducer. The miniature dead band is as little as 5cm to optimize small tank capacity. The minimum beam width is 7.6cm enabling application in narrow spaces.

- EchoPod: An innovative level sensor that replaces floats, conductance and pressure sensors that fail due to dirty, sticking, and scaling media in small tanks 49.2" (1.25m) or less. EchoPod, a general purpose sensor, combines non-contact switch, controller and transmitter capabilities in one package. Combining 4 relays, 4-20mA output and pump/valve control in one small sensor.

- EchoSpan: The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32' or 10m and is ideally suited for challenging ultrapure, corrosive or waste liquids. 7.6cm beam width for applications with restricted space.

- EchoSonic: The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 26' or 8m, and is well suited for challenging ultrapure, corrosive, slurry or waste liquids. The transmitter is broadly selected for atmospheric bulk storage, day tank, waste sump, process vessel, IBC tote, 55 gallon drum and waste sump applications. 5cm minimum beam width for applications with restricted space.

- EchoTouch: CSA approved intrinsically safe for use in general purpose or hazardous applications, the two-wire ultrasonic transmitter provides non-contact level measurement up to 18' or 5.4m and is ideally suited for challenging corrosive, slurry or waste liquids. Pushbutton calibrated, the transmitter is typically selected for atmospheric bulk storage, day tank and waste sump applications located within a classified area.

- EchoSwitch: The general purpose ultrasonic switch provides non-contact level detection up to 8m with 3 relays. This switch is well suited for a wide range of corrosive, waste and slurry type media and is broadly selected for atmospheric day tank, process vessel, pump lift station and waste sump applications. Offered in four ranges up to 8m with 1" and 2" transducers.

- SmartTrak: This general purpose switch package provides a complete solution for automatic filling or emptying of a tank between two adjustable level switch points with a 10A latching compact relay controller for pump or valve actuation. The product is typically selected for atmospheric day tank, process vessel and waste sump applications.

Arjay: Continuous Level Transmitters and On/Off Control (Capacitance type) for Liquids and Solids, Dry Pipe/Dry Pump/Dry Run Monitors, Interstitial Leak Alarms, Floating Oil Spill Alarms, Containment Spill Alarms, Oil/Water Separator Level Controllers and Level Alarm switches, Leak Pad Sensors, Plugged Chute Detectors.

MTS: Magnetostrictive Level Systems with Digital, HART or Analog Communications. High Accuracy Sanitary Level Transmitters.

Kistler-Morse: Weight, Level and Batching Measurement Solutions for Bulk and In-Process industries.

Flow Measurement & Control

Gems Sensors : RotorFlow® sensors provide Visual Indication, Continuous Sensing and Accurate Switching. TurboFlow® Flow Rate Sensors. Flow Switches (Piston, Shuttle, Paddle, Electronic) for liquids and gases.

EMCO Flowmeters : Patented pulsed AC technology magmeters capable of virtually eliminating eddy currents at high excitation frequencies for all sizes. Also available in Open Channel versions. Vortex, Turbine and Transit Time Flowmeters for measuring and controlling most Liquids, Gas and Steam applications in pipe sizes ranging from 1/2” to 100”. Available Flow Processor for calculation of volume, mass and heat rates for Steam, Liquids and Gases and able to display these variables in userselectable engineering units.

Eldridge Products Inc: Thermal gas flow meters and switches for measurement and control. The Master-Touch thermal mass flow meter has an explosion-proof, doublesided NEMA 4 enclosure which provides convenient access to all power supply input and sensor signal output connections. Installation requirements can be easily accommodated by your choice of in-line or insertion models with 115VAC, 230VAC, or 24VDC configurations. In addition to monitoring the flow rate and accumulated total flow, Continuous Tracking and Time tamping of high and low flow rates is included in the Run and Status Modes of the PC display and in the Status Menu of the LCD display.

GPI: Durable, Compact, High Precision Turbine Driven Industrial Grade Digital Flowmeters from 1/2" – 2" NPT in St.-St., Nylon, Aluminum. Standard options include pulse output, 4- 20mA, external power, 150# flanges and Tri-Clover fittings. Models available for Batch or Cumulative Total and Rate of Flow.

Macnaught: High Viscosity, Oval Gear Positive Displacement Flowmeters: 1/4" to 3".

Intek:Rheotherm® Low Flow Meters use patented Thermal Dispersion principle and unique TU sensor design for accurate Liquid Flow Measurement as low as 10cc/day and gas flows of 20 sccm. Rheotherm® Low Flow Switches with no moving parts provide Low-Flow Protection in small lines.

Pressure Temperature & Moisture

CAL Temperature/ Process Controllers: 1/16 and 1/32 DIN Autotuning P.I.D. Temperature and Process Controllers with RS232/485 Communications and Charting & Logging Software. Process Controllers with Modbus Communications and Calgrafix Monitoring & Configuration Software.

Eurotherm/Barber-Colman: Instruments for Temperature, Process and Machine Control, Interface, Indicator and Alarm units, Power Controllers, Multi- Loop System Products, Communications, SCADA and Chart Recorders, Actuators, Valves and Thermosensors.

Gems Sensors : High Performance Pressure Transmitters (Gauge & Absolute), Highly Stable and Accurate to within 0.08% up to 10,000 PSI, Enhanced Chemical Vapor Deposition (CVD) or Sputtered Thin Film Technologies. Easy to install, Resistant to Shock and Vibration for temperatures from -40°C to 121°C (-40°F to 250°F).

Gems Temperature Sensors : Factory set temperature switches for the protection of all types of internal combustion engines, pumps, compressors, gear boxes, hydraulic reservoirs and marine power plants. A compact and rugged construction allows it to be mounted in the toughest Off Highway Vehicle (OHV) applications. 70°F to 285°F.

Gems Pressure Switches : Ideal for direct control or as redundant back-up to existing monitors such as transducers. Field adjustable or factory set switches. Operating temperature –40°F to +180°F.

PMA: Digital, multi-function controllers, sensors, transmitters and software for chemical and pharmaceutical processing, plastics molding, automotive manufacturing, metals production, power generation and other automation projects. Features include diagnostics, simulation software, graphical trend recording, position feedback and rate of change monitoring.

Dwyer: Instruments for Measuring, Transmitting, Controlling, Recording and Testing Pressure, Flow, Level, Temperature, Humidity, Combustion and Air Velocity.

Signal Conditioning

Acromag: Signal Conditioning (Transmitters/Alarms/Math), Isolators/Splitters, HART Temp Xmitters, Profibus-DP, Ethernet (for scada), Modbus RTU (for scada)