Explore our solutions by clicking on the brand below:
Macurco Gas Detection is a leading global provider of rapidly deployable connected, intelligent gas detection systems that enable real-time safety and toxic threat detection. Macurco designs, develops and manufactures a full set of fixed and portable gas detection monitors for the protection of workers, responders and the community.
Macurco’s products provide the most advanced gas detection and protection via three product solutions. These solutions include the superior TracXP fixed wireless gas monitors for Oil and Gas and industrial applications; the innovative, industry-standard Macurco fixed gas monitors for security systems, building automation, HVAC systems, parking structures, cold storage, beverage and restaurant CO2 detection, and home/personal safety; and the ground-breaking AimSafety portable gas detection monitors for monitoring specific gases in potentially hazardous environments including fire and hazmat, oil and gas and industrial safety applications.
INFRARED TECHNOLOGY FOR FIRE PROTECTION – DETECT FIRES EARLY
When it comes to fire prevention, speed comes first. The use of early fire detection systems is becoming more and more important and is attracting a lot of attention. Especially in industrial and recycling plants, these systems have become an important safety standard. The infrared cameras from Optris are very popular for early fire detection systems and contribute with useful accessories to continuously increase the user-friendliness and effectiveness of such systems.
PROTECTION FOR MAN AND MACHINE
The largest range of safety switching appliances and systems worldwide for the protection of human life and machines. Schmersal is focused on machine safety devices and safety engineering services, to safeguard machines in compliance with current safety standards, without compromising productivity. The comprehensive range of more than 25,000 products includes safety switches, solenoid interlocks, emergency stop-switches, security sensors, safety mats with safety functions, photoelectric light barriers and end switches, which include limit switches, position switches and micro switches.
Safe switching and monitoring
A large program of safety-related switchgears for the position monitoring of guard doors and the non-contact protection of hazardous zones and danger points, as well as safety switching appliances for special applications.
Safe signal processing
Safety relay modules for various safety technology applications (e.g. for emergency stop and guard door monitoring) as well as centralized programmable safety controllers and decentralised field bus systems, e.g. a modular concept for safety functions control on small machines.
Automation technology
Switching appliances for the mechanical position detection in various fields of application as well as (safety) sensors with different operating principles; this section furthermore includes a comprehensive program of command and signaling devices.
Lift switchgear
Lift switchgear for various applications in the shaft pit, the lift car and the machine room: floor and fine-adjustment switches, positive-break door contacts, position switches, magnetic reed switches, remote alarm systems as well as the USP ultrasonic elevator positioning system.
SMART SAFETY-CERTIFIED ABSOLUTE ENCODER
Absolute encoders: MAGRES EAM580RS-SC – CANopen® Safety
Solid shaft with clamping flange
- Safety encoder single- or multiturn, SIL2, PLd – Cat. 3
- Safe communication via CANopen® Safety and standard data package with CANopen® communication
- Galvanic isolated and short circuit protected CAN interface
- High resistance to shock and vibrations, temperature changes
- E1 compliant design (ECE R10, Rev.6)
- High protection IP 67
- Protection against corrosion CX (C5-M)
- Electronic gear function (non-safety rated)
- Additional diagnostic data
SERIES CDT CARBON DIOXIDE/TEMPERATURE TRANSMITTER
NDIR CO2 Sensor, Universal Outputs, Optional RelayThe Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. In order to achieve a higher level of accuracy, the Series CDT includes barometric pressure adjustment. The CO2 universal output allows users to select the transmitter output to be 4-20 mA, 0-5 VDC, or 0-10 VDC to work with virtually any building management controller.
For applications that require visual indication, the wall mount configurations of the Series CDT can be ordered with an integral LCD display. To prevent tampering, the action of the buttons can be locked out using an internal dip switch selection. The Series CDT CO2 transmitters are available with a -S option that provides the necessary attributes and parameters to comply with DSA requirements for monitoring CO2 levels in schools. There is a front-facing LED that illuminates when the CO2 level exceeds 1100 PPM.
- Demand control ventilation in schools, office buildings, hospitals, and other indoor environments
- LEED® certification
VISUAL SIGNALING DEVICES
Auer Signal produces high quality light beacons for the industry. Choose among their wide range of LED beacon lights such as beacon strobe lights, flashing beacons, steady beacons or rotating beacon lights.
Products are offered with various mounting options such as surface mounted lights or panel indicator lights with a degree of protection from IP40 up to IP96.
Beacons are available in various sizes and colours and meet the highest standards for quality and sustainability.
Contact Us
Contact Davis Controls today about our state-of-the-art products and experience our expert application advice and reliable service!
CONTACT US
