Measurement and control of process variables within a production or manufacturing facility, including Level, Flow, Pressure, Temperature, Humidity, pH and Speed

KATflow 150 Advanced Clamp-on Ultrasonic Flowmeter is an advanced ultrasonic flowmeter for permanent installation. The dual-channel design allows for two independent measurements simultaneously or to install two pairs of transducers on a single pipe for locations where there are non-ideal flow conditions. With high temperature flow sensors rated to 250°C, a quick set up wizard and ten plug in card slots the KATflow 150 is the most versatile transit time flow meter available. Communication options are RS485, Modbus RTU/TCP/IP, BACnet, HART, Profibus, Profinet and Ethernet. Outputs are 4-20 mA, pulse and relay. The transmitter accepts temperature inputs for complete energy calculations, and pressure inputs to provide mass flow and information measurements with a built-in data logger.

The Baumer Group is one of the world’s leading manufacturers of sensors, encoders, measuring instruments and components for automated image-processing:

  • Presence Detection: Inductive, Photoelectric, Ultrasonic, Capacitive, Magnetic sensors
  • Distance Measurement: Inductive, Laser, Light section, Edge, Ultrasonic sensors
  • Encoders: Absolute, Incremental, Heavy Duty, Bearingless
  • Angle Measurement: Format alignment, Inclination & Acceleration sensors
  • Process Instrumentation: Level, Flow, Temperature, Pressure, Conductivity, Force
  • Identification / Image: Industrial Cameras & Vision sensors

Gems Sensors Designs and manufactures a broad range of:

  • Liquid Level Sensors & Switches
  • Solenoid Valves
  • Flow Sensors & Switches
  • Fluidic Systems
  • Pressure Sensors, Transducers, Switches

Eldridge Products, Inc. (EPI™)manufactures the Master-Touch™ and ValuMass™ thermal mass flowmeters & sensors for the measurement of virtually any gas or gas mixture. The measurement of gas flows can be an integral part of plant and process operation, a requirement for environmental reporting, a part of energy and cost savings efforts, or all three.

Arjay Engineering has been designing and manufacturing process and environmental controls for over 30 years for: Oil & Water, Level controls, Leak and Liquid interface alarms, Capacitance, Foam control Dry pump monitors, Gas detection (in air) and Plugged chute detectors.

The Davis/Klinger Magnetic Level Gauge is particularly suitable for duties where dangerous and toxic liquids or gases are involved and where the following features, benefits and options are required:

  • Immediate and accurate response to level changes, giving clear and sharp legibility
  • Continuous indication of liquid level, local and remote display
  • Point switching
  • No leakage to atmosphere. Automatic float warning
  • Display can be rotated through 360° irrespective of float position
  • High pressure & temperature capability – up to 200 bar unvented up to 400°C
  • Standard SG range 0.4 – 2.2 Display unit protection IP67

Request for Quote

Dwyer is a global leader in designing and manufacturing innovative controls, sensors and instrumentation solutions for the HVAC and process automation markets.

Enables industrial manufacturers, chemical distributors, municipalities and energy or food providers to manage their contained liquid and solid assets with quality solutions that measure tank inventories, automate tank processes, ensure workplace safety and protect the environment with instruments for chemical, water, wastewater, oil and dry solid applications.

GPI Great Plains Industries, Inc. is respected globally for its high quality fuel transfer pumps, fuel meters, flowmeters and Industrial instrumentation for fluid transfer pump and liquid flowmeter markets around the world. The GPI®, FLOMEC® and GPRO® brands serve Industrial, Commercial and Retail customers in many applications: fuel, agriculture, chemicals, manufacturing, construction, mining, oil and gas, and many more.

Intek Manufacturer of highly accurate and reliable flow measurement systems, capable of operating at low flow rates and compatible with most industrial chemicals and gases.

  • Rheotherm flow instruments: flow meters and flow switches
  • RheoVac systems and services for power plant condensers

Lutze Cable Installation Solutions offer reliable flexible and continuous flexing cable, wire management and industrial control solutions for factory automation applications.

SIKA Reliable and precise measurement, control and calibration technology for flow, level, temperature, pressure and force.

Macurco TracXP - Industrial Gas Solutions: The superior TracXP fixed / wireless gas monitors for Oil and Gas and industrial applications addresses special hazard applications including harsh industrial environments and hazardous locations with a comprehensive line of wired and wireless gas detection solutions to meet your most challenging applications.

Optris develops and manufactures innovative infrared measurement devices for non-contact temperature measurement, including stationary IR thermometers and infrared cameras for point and area measurement. Our comprehensive product portfolio comprises infrared measurement devices for different industrial applications as well as research & development. Along with our free thermal analysis software, our measurement devices enable constant monitoring and control of virtually every manufacturing process and reductions in production costs through specific process optimization.

Jumo is a leading manufacturer in the field of industrial sensor and automation technology. An innovative product range that includes the entire measuring chain from sensors to automation solutions for temperature, pressure, liquid analysis, flow rate, filling level and humidity.

AW-Lake From the smallest flow meter to the most comprehensive OEM flow meter solutions customized for specific applications. Specializing in innovative flow technologies, flow electronics and wireless networks. Offering coriolis, gear, turbine, and paddle wheel flow metering solutions.

Thomas Products - As a flow sensor manufacturer, they specialize in using only the highest-quality materials to ensure reliability and peak performance for your application.

Madison - If the fluid level in your equipment is critical to its operation or output, you need a company with years of expertise in liquid level sensing design. Specializing in single, multi-point, continuous, submersible and tilt level float switches and sensors.

Anfield pressure switches have been designed as affordable and reliable solutions for your pressure switching needs. Designed for OEMs, these switches have been rigorously tested from vibration tests to corrosion tests and can be found in all types of equipment and vehicles. Their switch line was selected to offer a large variety of solutions, offering small size, economical, blade contact switches for those looking to reduce the component cost to heavy-duty, high overpressure, snap action pressure switches for those who want something to take a beating.